Barcelona scientific program

Composite Veneers and lifespan of extended composite restorations:
Challenging ceramics

Abstract
This lecture explores how modern composite materials, when coupled with advanced anatomical layering, controlled polymerization, and proper maintenance strategies, can achieve long-term performance comparable to ceramic restorations. Using long-term clinical data and the direct–indirect composite veneer technique as a foundation, the session presents evidence of over 10-year follow-ups that demonstrate exceptional stability, aesthetics, and reparability. The lecture challenges the conventional assumption that ceramics are always the gold standard, highlighting clinical scenarios where composites provide superior biological preservation, cost-effectiveness, and ease of repair. Participants will gain practical insights into material selection, execution protocols, and longevity-enhancing layering and finishing techniques.

Learning Objectives

1. Evaluate the long-term performance of composite veneers in comparison to ceramics.
2. Apply the direct–indirect technique to enhance aesthetic predictability and durability.
3. Employ finishing, polishing, and maintenance protocols that extend restoration lifespan.

Bio
Dr. Newton Fahl, Jr. received his DDS degree from Londrina State University, Brazil, in 1987. In 1989, he received the Certificate in Operative Dentistry and Master of Science degree from the University of Iowa, USA. Dr. Fahl is a member of the American Academy of Esthetic Dentistry (AAED), a founding member and past president of the Brazilian Society of Aesthetic Dentistry (BSAD), and past-president of the Society for Color and Appearance in Dentistry (SCAD). He is an MCG-Hinman Foundation fellow. His passion and dedication to education have led Dr. Fahl to be the recipient of the American Academy of Esthetic Dentistry (AAED) 2008 President´s Award for Best Teacher and the 2011 American Academy of Cosmetic Dentistry (AACD) Excellence in Cosmetic Dentistry Education Award. Dr. Fahl is an Adjunct Professor of Operative Dentistry at the University of North Carolina (UNC). Dr. Fahl has published extensively on direct and indirect bonding techniques. He is on the editorial board of several peer-reviewed journals. Dr. Fahl and his wife, Grace, live in Curitiba, Brazil, where he maintains a private practice emphasizing esthetic dentistry. He is director of the Fahl Center in Curitiba, Brazil, where he conducts hands-on courses on direct and indirect adhesive restorations.

Injection molding technique: innovative “customized hybrid index “and updated clinical procedures

Abstract
Injection Molding Technique is a powerful therapeutic option in the restorative field, aiming to improve the aesthetics and function of teeth. It is a repeatable and predictable technique, which requires a direct/indirect procedure to transform the digital tooth design and the wax-up (analog or digital) into a definitive composite restoration.

The traditional technique involves the application of a single layer of flowable composite using a transparent silicone index. The author has developed this technique with the introduction of the innovative Customized Hybrid Index (CHI) with which it is possible to use both flowable or heated (thermoviscous) composites, with separate layering of dentin, enamel and opalescent incisal masses, thus improving the aesthetic result compared to the previous technique. Furthermore, have been codified the different clinical procedures: monolithic one-stage one-step approach, monolithic two step approach and layered two-stage three-step approach. Thanks to the CHI and the development of the technique, it is possible to broaden the Clinical application of IMT beyond the restorative field, thus including pre- and post-orthodontic restorations, periodontal cases and the more advanced full mouth adhesive rehabilitations. For all these reasons, IMT has now become an essential and highly predictable therapeutic alternative in daily clinical practice.

BIO
Born in Piacenza, Italy, on 19 Nov, class of 1964. Graduated in "Dentistry and Dental Prosthesis at the University of MI 1988 with 110 cum laude. He improved his knowledge in Conservative, Prosthetics and Periodontology with the annual courses of Dr. S. Patroni and Dr. PP Cortellini. Thus, the specialization course in Implant surgery techniques, (Prof. Weistein) at the University of MI, and the advanced surgery course applied to the implantology of Dr. C. Tinti and M. Simion. Perfects the techniques of mucogingival surgery with the theoretical-practical course of Prof G. Zucchelli. Active member of the Accademia Italiana di Conservativa e Restaurativa (AIC ) since 1996. Member of the Membership Acceptance Commission 2001 / 06-2006 / 11- 2019/24 and of the Cultural Commission 2012-2015. Active member of the Italian Academy of Esthetic Dentistry (IAED) since 2012 and member of the board of directors. Active member of the International Academy for Digital Dental Medicine (IADDM) since 2015. Visiting Professor at the University of Pavia (Italy), visiting professor at the Master of Restorative Dentistry, University of Torino, Bologna, Milano (Humanitas University ). Speaker on topics of Restorative Dentistry and Periodontology at several courses and congresses at national and international level. Author of conservative and prosthetic dentistry publications in national and international journals. Author of the chapters related to amalgam and composite restorations of the Text "Restorative Dentistry," Elsevier Ed. 2009. Author of some chapter of the book Esthetic Restorative Dentistry by AIC pubb. by Quintessence 2021.  Author of the innovative book entitled "Solutions - Adhesive Restoration Techniques and Integrated Surgical Procedures,” Edra Ed. 2021 translated into seven languages.
He was awarded the “Premio Case Report Dentista Moderno” 2002 first prize by the journal. Finalist (3rd place) at the international AIOP-APS Excellence in Prosthodontics Award, 2015. Awarded by Global Summit Institute among the world's top doctors for 2024. Reviewer for the International Journal of Esthetic Dentistry. He holds several training and specialization courses with hands-on experience about restorative dentistry with a multidisciplinary approach, at his own educational center (MFV Communication) in Vigozone and throughout the country and internationally. Private Practice in Vigolzone (PC, Italy ) from 01.04.1989 with a multidisciplinary and innovative approach to dentistry.
e-mail: veneziani.mar@gmail.com and   corsi.marcoveneziani@gmail.com         www.studiodentisticoveneziani.com

‍

Keys choices to optimize longevity of adhesive interfaces

Abstract
The aim of this lecture is to classify currently available adhesive systems and cements and to outline the appropriate step-by-step clinical protocols for direct and indirect restorations under different clinical conditions.

The specific characteristics of restorative materials and adhesive cements will be discussed to highlight the critical role of the clinician in achieving optimal bonding performance, including high bond strength, long-term durability, and reduced postoperative sensitivity. Despite their apparent simplicity (particularly simplified adhesives and self-adhesive cements) adhesive and luting procedures require meticulous, material-specific clinical protocols.

Finally, the lecture will present practical tips and clinical strategies to enhance aesthetic outcomes, biomechanical performance, bond strength, and long-term stability of the adhesive interface.

Bio
Dr. Lorenzo Breschi received his DDS degree cum laude in 1994 and PhD in Human Morphological and Molecular Sciences in 1998 at the University of Bologna (Italy). He is now Full Professor of Restorative Dentistry and Dental Materials at the Department of Biomedical and Neuromotor Sciences (DIBINEM), Head of Conservative and Restorative Dentistry and Director of the Master in Aesthetic Restorative Dentistry, at the University of Bologna (Italy). Prof. Lorenzo Breschi served as President of the following Academies: Italian Academy of Conservative Dentistry (AIC), International Academy of Adhesive Dentistry (IAAD), European Federation of Conservative Dentistry (EFCD), Dental Materials Group of the IADR (DMG-IADR) and the Academy of Dental Materials (ADM). Prof. Breschi is Associate Editor of the Journal of Adhesive Dentistry and member of the editorial board of several international scientific journals and actively involved in research on the ultrastructural aspects of enamel and dentin and their interactions with dentin bonding systems. Prof. Breschi has published more than 250 original papers and review articles on peer-reviewed journals on different aspects of adhesion and restorative materials.

Mastering the Implant Esthetic Zone:
360 degree Approach to Long term Results

Abstract

A biologically driven roadmap to long-term esthetic implant success. Covering GBR-based hard- and soft-tissue augmentation, prosthetically guided 3D positioning, biologic abutment concepts, precise soft-tissue sculpting, immediate 3D-printed temporaries, definitive ceramics, and maintenance protocols to prevent complications and ensure lasting stability

Bio
Dr. Sascha A. Jovanovic, DDS, MS is an internationally recognized leader in implant dentistry, and tissue regeneration for 35+ years. His career reflects a unique combination of academic excellence, surgical innovation, and global education leadership.
He maintains an implant surgery and research center in Los Angeles, CA.

He earned his dental degree from the Academic Centre for Dentistry Amsterdam (ACTA), and completed postgraduate training in Implant Dentistry at Loma Linda University, the first University-based post-grad program in implant dentistry, Periodontics at UCLA, leading university in mucogingival surgery and soft tissue regeneration, and Prosthodontics at the University of Aachen, first university program that combined prosthodontic training with implant surgery.

Dr. Jovanovic has authored more than 80 peer-reviewed articles and textbook chapters, with over 5,000 citations. He is the author of the Color Atlas of Implantology, published in eight languages, and his work in bone and soft tissue regeneration is widely regarded as foundational in the field.

He has served on the Board of the Academy of Osseointegration Foundation (AO) and is a past president of the European Association for Osseointegration (EAO). He has held visiting faculty appointments at leading institutions including UCLA, Loma Linda University, University of Aachen, University of Hong Kong, Chulalongkorn University, and the University of Buenos Aires.

Dr. Jovanovic has lectured at all major global dental and surgical congresses—including AO, EAO, AAP, AAOMS, ITI, and Osteology—and has been honored with awards from the AAP, California Society of Periodontists, German Society of Implantology (DGI), and South African Dental Association, among others.

In 2003, he founded the gIDE Dental Institute, a pioneering education platform for advanced dental training.
gIDE has since become a global leader in online and comprehend dental education, with a subscription-based video library and clinical training programs followed by thousands of dentists worldwide.

Handling soft tissue in fixed prosthodontics

Abstract
Soft tissue management is an essential element in more complex aesthetic cases. Margin location is critical in this type of case and different concepts will be discussed. Soft tissue management is also critical when closing diastemas and when gross alterations of form are required. Pontic design and the management of tissue at the pontic site is will be discussed in detail.

Bio‍
Tony Rotondo  is a registered specialist in Prosthodontics, he completed his undergraduate degree at the University of Queensland in 1984  and a postgraduate residency in Prosthodontics in 1996 at the University of California, Los Angles (UCLA).  He currently practices in Brisbane.  Tony has specific interests in dental aesthetics, dental implants and ceramic materials. He has and continues to teach undergraduates and postgraduates at the University of Queensland. He has been a visiting lecturer to the postgraduate program in prosthodontics at the University of Sydney and a visiting lecturer to Griffith University, School of Dentistry in Southport. Tony is a fellow of the International College of Dentists.

In the past Tony has been the president of the Australian Society of Aesthetic Dentistry (QLD Branch), secretary of ANZAP (Australian and  New Zealand Academy of Prosthodontists),  treasurer and founding member of AOS (Australasian Osseointegration Society, QLD branch),  an associate member of the Academy of Prosthodontics and a member of many other professional associations.  Tony is a product evaluator for dental companies  and presents numerous continuing educational programs nationally and internationally.

Abstract
The continuous introduction of new technologies, materials, and clinical protocols has greatly expanded treatment options in minimal invasive modern dentistry, increasing the complexity of evidence-based clinical decisions. This interactive treatment planning session aims to guide clinicians through the decision-making process by highlighting practical strategies for selecting appropriate protocols and biomaterials. The rationale behind the choices will be discussed, focusing on how to balance aesthetic demands with biological principles and functionality. Through case-based discussion, participants will gain insights into developing a comprehensive treatment plan that optimizes both clinical outcomes and the longevity of restorations.

Bio
Dr. Aiste Kernen-Gintaute is a Board Certified Prosthodontist by the Swiss Society of Reconstructive Dentistry and an Assistant Professor at University of Freiburg, Germany, Department of Prosthodontics, as well as Visiting Professor at University of Basel, Switzerland, Department of Reconstructive Dentistry. She graduated from Kaunas University of Medicine, Faculty of Odontology in Lithuania and completed her training in Prosthodontics at University of Freiburg, where she also received her title of Doctor of Dental Medicine. She serves as a Board Examiner for the Swiss Society of Reconstructive Dentistry and devotes her professional time to clinical practice, teaching and research. Her main interests are functionally and esthetically driven dental rehabilitations, as well as digital treatment concepts.

‍

‍

The Rehabilitation with All-Ceramics – From Material Considerations to Patient Related Risk Factors

Abstract
All-ceramic restorations are considered a reliable treatment option with high esthetic potential.  With the introduction of high-strength ceramics in monolithic applications, their clinical indications have expanded, assuming that functional demands are respected, and appropriate material selection ensures biomechanical integrity and long-term clinical success. This team lecture will address essential diagnostic parameters for identifying patient-related risk factors across different clinical applications, ranging from functional veneers to complex rehabilitations. Material properties and clinically relevant material combinations will be critically discussed. Treatment concepts will be presented based on long-term scientific clinical data and individualized patient anamnesis.

Learning Objectives:
1. To differentiate contemporary all-ceramic treatment concepts.

2. To evaluate material-specific selection criteria to ensure biomechanical integrity and longevity.

3. To formulate risk-adapted treatment strategies based on functional and biological factors.

‍

Bio
Daniel EDELHOFF
Daniel Edelhoff was Director and Chair at the Department of Prosthetic Dentistry at the Ludwig-Maximilians-University (LMU) in Munich. He is board-certified as a Specialist in Prosthodontics  of the German Society of Prosthodontics and Biomaterials, as well as a Fellow of the American Academy of Esthetic Dentistry (AAED). Since 2014, he has been an active member of the European Academy of Esthetic Dentistry (EAED) as well as Section Editor of the multidisciplinary international research journal Clinical Oral Investigations. In 2016, he became President of the German Association of Dental Technology (ADT) and in 2019 Academic Dean  in Dental Medicine at LMU. In 2021, he was the Scientific Chairman of the 1st EAED Virtual Meeting
Otto Prandtner
MDT Otto Prandtner began his professional journey in Austria (Oral Design), which subsequently took him to Germany (Peter Biekert) and then to California, where he worked with DDS Sheets & DDS Paquette. Since 2008, he has led his own laboratory in Munich as part of a specialized platform, focusing on interdisciplinary high-end esthetics and function. His work integrates clinical function, esthetics, and dental identity—scientifically supported by numerous publications. In 2019, his articles in the Journal of Esthetic and Restorative Dentistry ranked among the Top 20 most-read publications. He has been honored multiple times by the Arbeitsgemeinschaft Dentale Technologien (2011, 2025) with the “Best Lecture” award. In 2026, he will receive the Innovation Award in Dental Technology from the German Society for Esthetic Dentistry. His current book project, Dental Personality (since 2023), explores how individual identity and function can be recognized and preserved in modern restorative dentistry.

From Observation to Optics: Evolving the legacy of tooth colour appearance

Abstract
Willi Geller’s intuitive understanding of light and layering revolutionised how dental ceramics were approached in aesthetic dentistry. His seminal video “Light and Shadow” captured a truth that science would only later begin to quantify: that tooth colour is not a static property, but an appearance shaped by light, structure, and perception.
As both a colour scientist and a member of the oral design group, this lecture will revisit Willi Geller’s observations through the lens of contemporary optical science. We will explore how advances in spectral analysis, scattering theory, and imaging technology now allow us to understand the interplay of absorption and scattering in dental hard tissues—and how these principles affect the appearance of both natural teeth and restorative materials.
The lecture will also evaluate the capabilities and limitations of current colour measurement technologies, from spectrophotometers and intraoral scanners to calibrated imaging systems. In doing so, we will question long-held assumptions about the optical differences between ceramics and composites, and propose a more nuanced view grounded in scientific evidence.
In honouring Geller’s legacy, the aim is not to replace artistic intuition with numbers, but to equip today’s clinicians and technicians with a deeper understanding of the optical foundations that underpin truly lifelike restorations.

Learning Objectives:

1 Revisit Willi Geller’s concept of “light and shadow” through the lens of modern optical science.

2 Understand how scattering and absorption govern the appearance of natural teeth and restorations.

3 Critically evaluate the capabilities of colour measurement devices and digital systems.

4 Apply optical insights to improve shade matching and material selection in daily practice.

Bio
Sascha Hein, MDT, PhD
Dr Hein graduated in Dental Technology in 1997 in Munich, Germany, and completed advanced training in dental ceramics under Masahiro Kuwata in Tokyo in 2001. He earned his Master’s degree in Freiburg in 2005 and was inducted into the Oral Design group in 2007, followed by the Bio-Emulation group in 2012, where he served as president from 2014 to 2016. Dr Hein completed his PhD in Computational Colour Science at the University of Leeds under Professor Stephen Westland. His thesis was awarded a distinction for research excellence.

Each participant will receive a PERSONALIZED link for the workshop registration by mail. If you did not receive your link, please send a mail to Mondial, Mrs. Kerstin Scherz (eaed@mondial-congress.com)

1. Align Technolgy:
Intelligent Dentistry: How Artificial Intelligence is Redefining Diagnosis, Design, and the Ortho-Restorative Future.
Speaker: Prof. Falk Schwendicke

2. Meisinger
Bone defect management in the aesthetic zone: reliability and predictability
Speaker: Dr. Camillo Rodia

3. Nobel Biocare
From Extraction to Implant Placement in the Esthetic Zone: Redefining Today’s Possibilities
Speakers:  Dr. Tony Rotondo and Dr. Iñaki Gamborena

4. SprintRay
Contemporary Aesthetic Restorations: Integrating Digital Smile Design and Ceramic-Filled Resins in Chairside 3D Printing Workflows
Speaker: Dr. Monik Vasant

5. Straumann
Straumann learn, connect & celebrate
Speakers:  Dr. Florin Cofar and Dr. Oscar Gonzalez-Martin

6. Thommen Medical AG
Mastering Clinical Efficiency and Prosthetic Challenges
Speakers:  Dr. Ueli Grunder, Vincent Fehmer, MDT, Dr. Alfonso Gil

For more details click here....

‍

Are aligners still having limited indications?

Abstract
Clear aligners have evolved beyond simple malocclusion correction to become a strategic tool in interdisciplinary dentistry. The critical question is no longer whether aligners can move teeth, but whether they can consistently achieve the three-dimensional positioning required for high-quality, minimally invasive rehabilitation.

Although intrinsic limitations remain, clinical predictability depends less on the appliance itself and more on the quality of digital planning and the rigor of biomechanical protocols. Orthodontic- and prosthodontic-driven virtual setups must converge into a shared digital reference aligning orthodontic and restorative objectives from the outset. Treatment begins with an orthodontically driven digital set-up defining final occlusion and interdisciplinary sequencing. A prosthodontically driven evaluation is then integrated to refine orthodontic finishing and tooth positioning according to restorative and biological endpoints, enabling predictable and minimally invasive definitive rehabilitation. When supported by appropriate biomechanics, aligner therapy can translate digital objectives into clinically reproducible and biologically stable outcomes.
This presentation reviews biomechanical strategies for complex movements, emphasizing staging design, selective auxiliaries, and disciplined case selection. Clinical scenarios include implant site development, molar uprighting, occlusal plane leveling, space redistribution, three-dimensional incisor positioning, and root torque control to support periodontal stability, facial balance, and long-term tissue preservation.
Clear aligner indications are not unlimited; however, within a coherent digital and biomechanical framework, they represent a predictable medium for pre-prosthetic optimization and biologically respectful restorative results.

BIO
Dr. Silvia Rapa, DDS, MS, completed a three-year postgraduate specialty program in Orthodontics at the University of Milan, earning her Master of Science degree with honors in 2009. Since 2011, she has been in private practice in Parma at the Face-Ortho Surgical Center, which she co-directs with Dr. Renato Cocconi. Her clinical practice integrates advanced digital workflows into orthodontic and orthognathic treatments using both fixed appliances and clear aligners, with a strong emphasis on interdisciplinary approaches. Dr. Rapa serves as Adjunct Professor in the Department of Orthodontics at the University of Padua. She lectures nationally and internationally and directs a comprehensive course dedicated to digital planning and aligner biomechanics. She is a member of the European Board of Orthodontics (EBO), the Italian Board of Orthodontics (IBO), and the European Board of Aligner Orthodontics (EBAO). Her professional focus lies in digital treatment planning applied to complex cases with the aim of improving predictability and supporting minimally invasive restorative outcomes.

‍

Design, Intent, and Outcome: Clinical Reality in the Age of AI

Abstract
Design defines intent, while the final result represents outcome. This presentation explores current clinical reality in the context of emerging AI-driven disruption, examining how AI-assisted previsualization challenges existing treatment workflows. We analyze where digital tools succeed, where gaps remain between design and execution, and how automation may contribute to greater coherence between intent and outcome without replacing clinical judgment.

Bio
Florin Cofar attended the University of Victor Babes, Timișoara, where he received his degree in dentistry in 2007. Specialises in esthetic rehabilitations, working interdisciplinary for treating complex cases with orthodontic and implant components, as well as minimally invasive restoratives.Co-founder of smilecloud.com. Private practice in Timisoara, Romania.

‍

Tooth Shape Management in Post-Orthodontic Patients:
A Conservative Approach

Abstract
Orthodontic therapy establishes alignment, occlusal balance, and spatial harmony within the dental arches. However, in some cases, orthodontic correction alone may not be sufficient to achieve the optimal esthetic result. Tooth shape anomalies, size discrepancies, and subtle morphological disharmonies can persist after treatment, potentially influencing both smile esthetics and long-term stability.
In these situations, a minimally invasive combined orthodontic–restorative approach allows the clinician to complete and refine the case. Additive adhesive procedures, guided by careful esthetic and functional planning, enable correction of morphological discrepancies while preserving maximum enamel and maintaining occlusal integrity.
Particular attention will be given to young patients, in whom preservation of sound dental tissue is essential. Through clinical cases, the lecture will demonstrate how interdisciplinary planning and conservative restorative strategies can enhance smile harmony and ensure predictable, long-lasting outcomes.

Bio
Graduated in Dentistry and Dental Prosthetics from the University of Turin. She is a member of the Turin Order of Surgeons and Dentists. In 2013 she obtained a second level Master's degree entitled "Prosthetics and implant prosthetics with advanced technologies" directed by Prof. R. Scotti at the Alma Mater Studiorum University of Bologna. In 2019, she completed his PhD in Biomedical and Neuromotor Sciences at the University of Bologna (Supervisor: Prof. Lorenzo Breschi). From October 2018 to October 2020, she was a postdoctoral research fellow with a project entitled "Control of adhesive stability using crosslinking agents" at the University of Bologna (Supervisor: Prof. Lorenzo Breschi). From October 2021 to today she has held the position of RTD-A at the Department of Surgical Sciences of the University of Turin and the role of University Medical Director at the City of Health and Science of Turin. Active Member of the Italian Academy of Conservative and Restorative Dentistry (AIC) since May 2017. In October 2023 she obtained the title of Fellow of the Academy of Dental Materials (USA). Speaker at several conferences in Italy and abroad and author of more than 80 scientific publications in international journals. Since January 2011 she has been working as a freelancer in her private practice.

‍

‍

Diagnosis & conservative protocols for white & brown dyschromia

Saturday, May 30th 2026 12:00 - 12:30

Abstract
Enamel infiltration was initially developed to arrest the progression of early proximal carious lesions and has proven to be highly successful in doing so. However, when the same technique is applied for the esthetic management of developmental enamel defects, the results can be more challenging to control. Based on accurate diagnosis, transillumination findings and histological considerations, the clinician should adjust the original protocol to achieve predictable infiltration of hypomineralized enamel. Furthermore, the session will cover how to optimize esthetic outcomes by combining infiltration with minimal invasive techniques such as micro-abrasion, bleaching and direct composite bonding.

Bio
Dr. Erik-Jan Muts graduated from the State University in Groningen (The Netherlands) in 2013 and became a recognized Prosthodontist in 2023 (Fellow of EPA). He specializes in esthetic, restorative, and implant dentistry, running his own private clinic, MP3 Tandartsen in Apeldoorn, The Netherlands. Erik-Jan co-founded KARMA Dentistry and recently published his book ‘Infiltration in Daily Practice.

‍

‍

Veneer preparations with a fully automated dental robot -
The revolutionary approach

Abstract
Since two decades there is strong and growing demand globally for aesthetic dental treatments such as porcelain laminate veneers.
The extremely crucial step is all about how to minimally prepare the teeth since the preservation of healthy enamel is the key to long term success and health of the tooth structure. The ideal approach to that is to be able to prepare the tooth through a solid reference which happens to be the APT (Final Mock up / wax up) representing the final aesthetic & functional design.
Until now the analog preparation techniques such as preparing the tooth through the APT had been widely discussed and executed.
In this lecture the focus will be on how to digitally create the final prep design and execute the minimally invasive tooth preparations with the help of a fully automated dental robot. Research has already proven that the precision of the robot is way more accurate than prepping the teeth free hand.
The new workflow based on the extremely high precision of the system, will allow the veneers to be fabricated in advance and the dentist finalize the whole procedure at the same day of tooth preparation, referring to an “all in one” concept.

Bio
With degrees from the University of Istanbul (School of Dentistry), the University of Kentucky (Department of Prosthodontics) and the Yeditepe University in Istanbul (Department of Prosthodontics), Dr. Gurel is accomplishing his goal to provide the very best dental aesthetic treatment to each patient. Dr. Gurel has an extensive and celebrated list of scholastic achievements in his field, beginning with the fact that he is the founder and the honorary president of EDAD (Turkish Academy of Aesthetic Dentistry). Furthermore, Dr. Galip Gurel was the President of the European Academy of Esthetic Dentistry (EAED) for the years 2011 & 2012. In October 2014 Dr. Gurel received “The Smigel” award from the New York University College of Dentistry. “The Smigel” award is created to honor dentists whose work in the field of aesthetic dentistry demonstrates excellence, talent, vision, and commitment, and who have made significant contributions to the public and strengthened the areas of dental aesthetics and continuing education. It is an award dedicated to the best aesthetic dentists in the world celebrating their social contribution, their support for the improvement of aesthetic dentistry, their input in the technological advance in general dentistry, for their vision and ability to present innovative ideas among fellow dentists globally! Dr. Galip Gurel is also a member of the American Society for Dental Aesthetics (ASDA) and American Academy of Restorative Dentistry (AARD) and the honorary diplomate of the American Board of Aesthetic Dentistry (ABAD). The list of professional achievements evolves with the position of editor-in-chief of the Quintessence Magazine in Turkey and on the editorial board of the AACD journal, EJED (European Journal of Esthetic Dentistry). Following his never ending passion for aesthetics and education, Dr. Gurel has been lecturing all over the world and giving post graduate lectures on aesthetics at the New York University, USA and Yeditepe University in Turkey. He is the author of The Science and Art of Porcelain Laminate Veneers published by Quintessence publications in 2003.